Search

SearchSearch
Need help with an alternative? Contact an expert
Back to overview

KINS' BLUE Performance

The universal solution for stationary tube cutting

Meet the new standard in stationary tube cutting. The KINS' BLUE Performance saw blade is your safe, reliable choice for any cutting job, and frequent job changes — regardless of material (except for stainless steel), wall thickness, or machine condition. With cutting speeds up to 300 m/min and a tensile strength range between 400 - 1,800 N/mm², this is the one blade that handles it all— thin-walled or thick-walled, low or ultra-high tensile.

Designed for steel service centers, automotive suppliers, and anyone cutting a wide range of materials and wall thicknesses, the KINS' BLUE Performance redefines flexibility in stationary tube cutting. Altering your machine setup no longer means changing your blade — consistent, near-finish-quality cuts are guaranteed every time, on every machine.

Read more Show less

  • Low/medium tensile

  • High tensile

  • Cutting speed

  • Blade life

  • Tube

  • Thin tube

  • Thick tube

Get your bladeGet your blade
Get your bladeGet your blade

One saw blade. Every job. All machines.

The KINS' BLUE Performance is built for versatility without compromise. It performs reliably across all types of stationary tube cutting machines — including less-maintained equipment — and delivers consistent cutting results regardless of operator knowledge or machine conditions. Whether you're running a Rattunde, Mair, Simec, Soco, RSA, Adige/BLM, Sinico, or Bewo, the KINS' BLUE Performance is your universal fit.

 

Minimize post-machining. Maximize output.

The KINS' BLUE Performance saw blade delivers a surface finish as close to end quality as possible, helping you minimize or eliminate post-machining. Save on cycle time, reduce downstream tooling costs, and keep your production in motion — without interruption.

On high-performance machines with accurate chip load control and variable feed rates, the KINS' BLUE Performance reaches its full potential with very high feed rates and outstanding blade life.

Advantages of KINS’ BLUE Performance

  • Suitable for all types of low, medium, or high-tensile tubes between 400 – 1.800 N/mm2
  • Cutting speeds up to 300 m/min
  • Safe choice for all types of stationary sawing machines, including less-maintained machines
  • Consistent cutting results, regardless of machine conditions and/or operator knowledge
  • Very high feed rates and high blade life on high-performance machines with high output
  • Ideal for frequent material changes in industries like steel service centers and automotive
  • Because the cutting surface is as close to the end stage as possible, you will minimize or avoid post-machining, save cycle time, and tool costs
  • Excellent performance on sawing machines with accurate chip load control and variable feed rates

Applications for KINS’ BLUE Performance

  • Cutting low, medium, and high tensile (welded) steel tubes between 400 – 1,800 N/mm2 on all types of stationary sawing machines
  • Cutting speeds between 140 – 300 m/min, depending on the machine and materials
  • Tooth loads ranging from: 0.035 – 0.20 mm/tooth

 

Applications for KINS’ BLUE Performance include:

  • Scaffolding
  • Funiture
  • Automotive tubes
  • Structurals
  • Mine bolts
  • Freeform profiles
  • Seating components
  • Sleeves, cylinders, bushings
  • Drive shafts
  • Chassis parts
  • Camshafts, piston rods
  • Suspension parts
  • Fittings, couplings

Typical steel grades for KINS’ BLUE Performance

  • Low carbon steel
  • Medium carbon steel
  • High carbon (high tensile) steel
  • Carbon steel (E355 +C)
  • Boron alloyed steel
  • High-strength low-alloy (HSLA)
  • Advanced high-strength steel (AHSS)
  • Manganese alloyed steel
  • (Docol) Dual phase
  • ‘Sticky’ materials
  • XPF grades
  • 22MnB5 / 26MnB5 / 27MnB5, 34CrMo4 / 34CrMo4-HC / 34CrMo4-LC / 34MnB5, MW1000L / MW700L

Worldwide network

Find your distributorGet your saw blades

Typical Machines

Manufacturer Machine type
Rattunde ACS Series
RSA Rasacut
Sinico TOP Series
Bewo DCH-SCF (single/double), SCF Series
Soco SA series
Adige / BLM TS/CM series

STANDARD RANGE KINS’ BLUE Performance

Diameter (mm) Kerf (mm) Bore hole (mm) Pinhole combination Number of teeth (Z)
285 2,0/1,7 32 4/9/50 4/11/63 80
285 2,0/1,7 32 4/9/50 4/11/63 100
285 2,0/1,7 32 4/9/50 4/11/63 120
285 2,3/2,0 32 4/9/50 4/11/63 120
285 2,0/1,7 40 4/12/80 4/12/64 80
285 2,0/1,7 40 4/12/80 4/12/64 100
285 2,0/1,7 40 4/12/80 4/12/64 120
285 2,3/2,0 40 4/12/80 4/12/64 120
315 2,3/2,0 32 4/9/50 4/11/63 80
315 2,3/2,0 32 4/9/50 4/11/63 100
315 2,3/2,0 32 4/9/50 4/11/63 120
315 2,3/2,0 32 4/9/50 4/11/63 130
315 2,3/2,0 40 4/12/64 4/16/80
4/12/90		 80
315 2,3/2,0 40 4/12/64 4/16/80
4/12/90		 100
315 2,3/2,0 40 4/12/64 4/16/80
4/12/90		 120
315 2,3/2,0 40 4/12/64 4/16/80
4/12/90		 130
315 2,3/2,0 50 4/16/80 80
315 2,3/2,0 50 4/16/80 100
315 2,3/2,0 50 4/16/80 120
315 2,3/2,0 50 4/16/80 130
350 2,7/2,5 32 2/8.5/45 4/11/63
4/9/50 4/11/63		 100
350 2,7/2,5 32 2/8.5/45 4/11/63
4/9/50 4/11/63		 120
350 2,7/2,5 32 2/8.5/45 4/11/63
4/9/50 4/11/63		 140
350 2,3/2,0 32 2/8.5/45 4/11/63
4/9/50 4/11/63		 140
350 2,7/2,5 40 2/8.5/55 4/12/64 100
350 2,7/2,5 40 2/8.5/55 4/12/64 120
350 2,7/2,5 40 2/8.5/55 4/12/64 140
350 2,3/2,0 40 2/8.5/55 4/12/64 140
350 2,7/2,5 50 4/16/80 100
350 2,7/2,5 50 4/16/80 120
350 2,7/2,5 50 4/16/80 140
350 2,3/2,0 50 4/16/80 140
360 2,7/2,5 32 2/8.5/45 4/11/63 100
360 2,6/2,25 32 2/8.5/45 4/11/63 100
360 2,7/2,5 32 2/8.5/45 4/11/63 120
360 2,6/2,25 32 2/8.5/45 4/11/63 120
360 2,7/2,5 32 2/8.5/45 4/11/63 140
360 2,6/2,25 32 2/8.5/45 4/11/63 140
360 2,7/2,5 40 4/12/64 4/12/90
4/12/90 4/16/80		 100
360 2,6/2,25 40 4/12/64 4/12/90
4/12/90 4/16/80		 100
360 2,7/2,5 40 4/12/64 4/12/90
4/12/90 4/16/80		 120
360 2,6/2,25 40 4/12/64 4/12/90
4/12/90 4/16/80		 120
360 2,7/2,5 40 4/12/64 4/12/90
4/12/90 4/16/80		 140
360 2,6/2,25 40 4/12/64 4/12/90
4/12/90 4/16/80		 140
360 2,7/2,5 50 4/12/90 4/16/80 100
360 2,6/2,25 50 4/12/90 4/16/80 100
360 2,7/2,5 50 4/12/90 4/16/80 120
360 2,6/2,25 50 4/12/90 4/16/80 120
360 2,7/2,5 50 4/12/90 4/16/80 140
360 2,6/2,25 50 4/12/90 4/16/80 140
370 2,7/2,5 32 2/8.5/45 2/11/63 100
370 2,7/2,5 32 2/8.5/45 2/11/63 126
370 2,7/2,5 32 2/8.5/45 2/11/63 140
370 2,7/2,5 50 4/16/80 100
370 2,7/2,5 50 4/16/80 126
370 2,7/2,5 50 4/16/80 140
400 2,7/2,5 32 4/11/63 140
400 2,7/2,5 32 4/11/63 160
400 2,7/2,5 32 4/11/63 170
400 2,7/2,5 40 4/12/64 140
400 2,7/2,5 40 4/12/64 160
400 2,7/2,5 40 4/12/64 170
400 2,7/2,5 50 4/16/80 140
400 2,7/2,5 50 4/16/80 160
400 2,7/2,5 50 4/16/80 170
420 2,7/2,5 40 4/16/80 120
420 2,7/2,5 40 4/16/80 144
420 2,7/2,5 50 4/16/80 120
420 2,7/2,5 50 4/16/80 144

Explore the possibilities within our wide range to optimize your sawing process

By exploring our sawing blades you can discover new ways to enhance efficiency, precision, and TCO of your sawing processes.

Read more about us